Coating Plates


Vulcan X-Coat

Rubber-surface strippable coating plate, with ISEGA Certification.

PrePress Advantages
  • Knock-out areas without strings
  • Fast and accurate cad cutting
  • Easy to strip with clear and visible cut lines
  • Easy to be handled and re-used out coating applications

 

Pressroom advantages
  • No fabrics pattern
  • Reduced back trapping
  • Softer surface and reduced hardness
  • Consistent coating transfer over long runs

Vulcan X-Coat Plus

Aqueous/UV polymer Coating Plate

Pre-press advantages
  • High Shore A value (90)
  • Fast and accurate cad cutting
  • Easy to strip with clear and visible cut lines
  • Easy to be handled and re-used

 

Pressroom advantages
  • No fabrics pattern
  • Reduced back trapping
  • Interchangeable with most polymer surfaced products without adjustment of packing or stripes
  • Exceptional sharp lines on knock-out
  • Consistent coating transfer over long runs

Vulcan X-Coat Pro

Aqueous/UV TPU Coating plate

Pre-press advantages
  • Easier set up on the press on both sides (no fabric inside)
  • Knock-out areas without strings
  • Fast and accurate cad cutting
  • Very good stripping with clear and visible cut lines

 

Pressroom advantages
  • Top layer manufactured entirely in polymer provides excellent surface resistance to UV and Aqueous coatings
  • Homogeneous coating transfer for a high-quality print job
  • Significantly reduced ink back trapping provides higher productivity with less downtime necessary for clean up
  • High resistance polyester carrier provides excellent dimensional stability
  • No fabrics pattern

TYREF Rosa Polymer

Varnishing plate for offset coating.

Using the latest available polymer materials and production techniques, Tyref has developed a polymer plate of the highest quality. The special surface and solvent resistant construction give a dual-purpose product suitable for long run. WATER BASED (AQUEOUS) and UV coating applications.

 

Product Features
  • Suitable for UV and water-based (aqueous) coating applications
  • Abrasive resistant surface
  • Solvent resistant construction
  • Excellent coating lay and transfer
  • Superior sheet release
  • No ink build-up characteristics
  • Durable, long life
  • Consistent guage tolerance
  • Easy, consistent cutting and peeling
  • Suitable for cutting manually or by plotter
Available in thickness:
  • 1.15mm (0.045”)
  • 1.35mm (0,053”)

TYREF Rossa H.P.

The Rossa H.P. surface was developed to optimise the transfer and performance when applying speciality coatings, including Soft Touch, Drip Off, Satin and Matt products. The soft, smooth surface allows these coatings to be applied with minimum pressure giving superior transfer and lay. The new construction gives the product additional stability on press and easy stripping characteristics.

Product features
  • Suitable for speciality water-based (aqueous) and UV coating applications
  • Abrasive resistant surface
  • Solvent resistant construction
  • Excellent coating lay and transfer
  • Superior sheet release
  • No ink build-up characteristics
  • Durable, long life
  • Consistent guage tolerance
  • Easy, consistent cutting and peeling
  • Suitable for cutting manually or by plotter
Available in thickness:
  • 1.15mm (0.045”)
  • 1.35mm (0,053”)

TYREF Eco Premium Polyester Backed

The micro-ground compound surface has been designed to optimize transfer ability, maximize chemical resistance to UV and water-based (aqueous) coating and for easy cleaning.

Product features
  • Long Run in UV
  • Excellent performance in water based (Aqueous)
  • High Gloss Levels
Available in thickness:
  • 1.15mm (0.045”)
  • 1.35mm (0,053”)

TYREF Aqua Plus Compressible Polyester Backed

This unique product is truly dual purpose and suitable for UV and Water Based (AQUEOUS) coating applications. The smooth surface compound has been specially developed to give high levels of gloss and excellent sheet release in both applications. As with all our Aqua Plus range of products, the surface compound has been developed to eliminate ink build up in the water-based (AQUEOUS) coating application.

Product features
  • Long run in water-based (aqueous)
  • No ink build-up characteristics
  • Excellent performance in UV
  • Deep stencil depth
  • Easy to strip
  • ISEGA Certified for food packaging
Available in thickness:
  • 1.96mm (0.077”)

TYREF Aqua Plus Fabric Backed

Tyref’s new innovative 3ply construction has no fabric layer between the surface and compressible layer. This unique design offers the printer many benefits over competitors’ products. Our construction gives greater smash resistance and no opportunity for fabric impression (orange peel effect) transferring onto the coated sheet. After cutting, the blanket shows no fibres on the cut edge, preventing coating and cleaning agents from penetrating the blanket.

Product features
  • Suitable for UV and water-based (aqueous) coating applications
  • New solvent resistant surface has no ink build-up characteristics
  • Easy to strip compressible layer
  • Stable 3ply low stretch carcass
  • Clean cut stencil edges – no loose fibres
  • High smash resistance
  • Durable, long life

 

Available in thickness:
  • 1.95mm (0.077″)

FOLEX Folacoat Plus Pet

The coating plate for the transfer of water-based and UV coatings received a tear-resistant, double-layer polyester film laminate.  This laminate reduces the risk of the carrier break for the largest production runs and ensures a long service life.  The pink-coloured, coating-carrying top polymer coating has received a protective/sliding film to protect the coating plates against
mechanical damage.

This film allows trouble-free sliding of the cutting head by a CAD cutting system and visualizes the applied cuts.

Product features
  • Recommended for direct coating
  • Suitable for aqueous coating
  • Suitable for UV coating
  • Slipping film/protection film
  • manual cutting possible
  • Ideal for CAD cutting systems
  • Polyester-basis/ carrier
  • Cutting protection (double layer)

 

Available in thickness
  • 15mm
  • 35mm

FOLEX Folacoat Diamond

The Folacoat Diamond has a soft top polymer with excellent surface characteristics for excellent UV-coating transfer. The coating plate can be quickly and easily stripped and ensures a long service life. Additionally, excellent coating results with water-based coatings can be achieved.

Product features
  • Suitable for aqueous coating
  • Suitable for UV coating
  • High gloss effect
  • Very good register stability even with long runs
  • Soft polymer layer

 

Available in thickness
  • 1.15mm

To place an order call 01827 251 951 or email sales@intuprint.co.uk 

Need some help choosing the right products for your requirements? Get in touch. We have been supplying the pint industry for over 35 years and our team are here to help you.

Proud to be OFFICIAL UK distributors for: